With the Fendt 1290 S XD you’ll deliver your straw in perfect condition. Highest bale compaction, lowest maintenance and longest service life – that’s what sets every Fendt big baler apart. And ... every bale is identical.
Satisfy your hunger for performance.
The press writes.
profi (03/2017)
On the maximum compaction setting and at a bale length of 2.40 m, believe it or not, we achieve weights of 479 to 499 kg! At 31 to 33 seconds per bale, that equates to a peak output of up to 57.4 t/h – astonishing at a compaction of almost 193 kg/m3! Our verdict: in terms of flow rate and compaction, the Fendt 1290 S XD is in the Champions League.
The press writes.
profi (03/2017)
It’s not just the flow rate and baling density that we love about the Fendt 1290 S XD. We were also impressed with the bale shape, use and maintenance — and especially of the new cutter unit.
The press writes.
profi (03/2017)
The binders are fitted with a central lubrication system as standard, supplying a total of 26 lubrication points. Another standard feature is the large tangential fan to clean the binder, powered by the onboard hydraulics system. The results are impressive, even with brittle barley straw.
The press writes.
profi (03/2017)
Both the right and left dust-tight tine boxes can accommodate 15 roles of tine each. Even with the Fendt-endorsed Tama High Density at only 108 meters of length per kilo, that's more than enough for up to 1,000 bales of 2.50 m! And because the rollers are at a 30° angle, the tine supply is always easy to check.
Fendt operators have this to say.
“After trying out different balers, the bale shape and stability of the Fendt baler won us over""This baler is also very quiet and has run smoothly so far."
Managing Director Bernard Kowolik, Peeneland Agrar GmbH
(profi 03/2017)
Some 13,000 bales of hay, straw and silage have been baled so far and Sabine Kremser-Braig is delighted with the bale shape and stability, "even with all the blades in use." The cutter unit was the reason they decided to order a 1270 S "ProCut". "The pull-out really helps when replacing the blades"
Sabine Kremser Braig, service contractor from Obermarchtal
(profi 03/2017)
A baler with drive
"We chose the new Fendt 1290 S XD with built-in cutter unit. It meant we can offer our customers a combination of baling and cutting."
Jørgen Kristensen, contractor with 13 employees, Denmark – 936 Vario, baler 1290 XD
The full range
Fendt full-liner: Tractors, Katana forage harvesters and big balers. The contractor Heribert Glaßl has everything under control in his business.
Björn Kaiser & Heribert Glaßl, Germany – 700 to 900 Vario, 6335 C, Katana 65, baler 1270 S
The next step to your Fendt square balers
Fendt square balers
Information material